SERIES 312S

SME – Series 312S

Bộ tay cần 12 inch có cấu trúc từ magnesium có lợi thế về giảm sai số bám rãnh (tracking) và độ méo hài nhờ vào độ dài của cần so với dòng tay cần 9 inch.

ADDITIONAL INFORMATION

BUILD

The 12in pressure die-cast magnesium construction takes advantage of the reduction in maximum tracking error/distortion afforded by the greater arm length when compared with 9in models.

• Unique pressure die-cast magnesium shell detachable and interchangeable without disturbing cartridge or wiring.
• Design of headshell clamping ensures a rigid junction with the tone-arm.
• Stainless steel cross shaft, ground and thread ground. Carried in massive yoke on 10mm precision ball races. Axes at record mean level to minimise warp-wow.
• Unique assembly gives high rigidity and allows bearings to be critically adjusted before the tone-arm is fitted.
• Stainless steel vertical shaft, ground and thread ground, with integral 16mm diameter flange to couple shaft and yoke.
• 23mm diameter steel pillar, heat treated, ground and honed, carries two 17mm precision ball races, widely spaced to resist tilt.

DAMPING

• Internal constrained layer damps minute residual vibrations making tone-arm acoustically inert.
• Tungsten-alloy balance weight carried on two-point suspension. Extra-low inertia design assists warp riding.
• Underslung weight housing corrects centre of gravity and provides non-reflective tone-arm termination.
• Swivelling, damped output socket minimises vibration transmission in sub-chassis use.

ADJUSTMENTS

• Anti-skate control operates through tension spring and filament. Dial calibrated to correspond with VTF and has positive OFF position.
• Lowering/raising control gives smooth positive action. Height of lift can be adjusted.
• Dual-lock base provides movement control with high rigidity.
• Reference lines on tone-arm facilitate VTA setting.
• Fine adjustment of horizontal tracking angle (HTA).
• Cartridge leads and internal wiring in Silver litz.

SPECIFICATION

MANUALS

Manual for Series 300 Tonearm (PDF)

312S Information Sheet

312S Information Sheet 2